<acronym id="r5dxe"><label id="r5dxe"></label></acronym><p id="r5dxe"><strong id="r5dxe"><xmp id="r5dxe"></xmp></strong></p>

    <p id="r5dxe"></p>

    <track id="r5dxe"><strike id="r5dxe"></strike></track>

    <pre id="r5dxe"><strong id="r5dxe"><xmp id="r5dxe"></xmp></strong></pre>
    <pre id="r5dxe"><label id="r5dxe"><xmp id="r5dxe"></xmp></label></pre>
    服務熱線:15895355226
    聯系我們:0510-83271222
    關注我們

    產品展示

    product center
    您當前所在位置:首頁>管子焊接接長滾輪架

    新聞推薦

    全液壓箱罐翻轉機介紹

    無錫市匯安威力焊割機械有限公司注重技術立異,全液壓主動控

    機器人變位機在汽車生產中的應用

    機器人變位機目前已廣泛應用在汽車制造業,汽車底盤、座椅骨

    集裝箱翻轉機集裝箱起重機的操作

    集裝箱翻轉機集裝箱起重機的操作及作用(role) 集裝箱翻轉機

    集裝箱翻轉機選液壓

    集裝箱翻轉機選液壓(hydraulic) 集裝箱是指具有一定強度(stre

    聯系我們

    無錫市匯安威力焊割機械有限公司
     
    聯系人:徐亮
    手  機:15895355226
    座  機:0510-83271222
    傳  真:0510-83271169
    郵  箱:info@wellleader.com
    Q   Q:  28632393
    地  址:無錫市惠山區錢橋鎮稍塘

    管子焊接接長滾輪架

    品牌:匯安威力焊割機械


    全國統一訂購熱線:15895355226 立即咨詢
    產品詳情 products Details
    管子焊接接長滾輪架   塔筒接長站由一套固定式液壓組對滾輪架和一套可調焊接滾輪架組成。
    塔筒在本工作站組對焊接,直至達到所要求的長度。一節帶法蘭筒體放置在主動滾輪架和從動滾輪架上,二節帶法蘭筒體放置在另一組液壓組對滾輪架設備。在點焊組對兩節筒體時,滾輪架在軌道上移動,即可頂緊兩節組對筒體。操作機完成外環縫和內環縫焊接;逐步地,隨著塔筒節數增加,塔筒隨之變長,直到后來帶法蘭的筒體組對焊接完成。
    The growing line is composed by one set of fix type hydraulic fit-up rotator and one set of movable adjustable rotator.
    The wind tower body is fit-up and welded at this working station. The first section is placed on the adjustable rotator, the second is put on the hydraulic fit up rotator. After align the two section, by adjusting fit up rotator, spot welding is done by rotate the adjustable rotator. The manipulator complete outside and inside circular welding after fit up. Steps by steps, the sections is connected and grow to the whole line, until the last section with flange is welded.
    一步,裝夾大端帶法蘭筒體于主動滾輪架一側;
    1st step, put the section with flange on one set of rotator
    二步,裝夾二節筒體放在組對滾輪架一側;通過調節組對滾輪架實現組對焊接;
    2nd step, put the second section on the fit up rotator, do spot welding by adjust the fit up rotator.
      
    三步,焊接操作機完成內環縫焊接;
    3rd, Welding manipulator finish inside circular welding.
    四步,主動行走滾輪架運載工件向后移動;
    4th, move the adjustable rotator to pull the section backward.
    五步,裝夾第三節筒體于組對滾輪架一側;
    5th , put the third section on the fit up rotator.
    六步,通過調節組對滾輪架實現組對焊接;
    6th, do spot welding by adjusting the fit up rotator.
     
    七步,焊接操作機完成內環縫焊接;
    7th , welding manipulator finish inside circular welding.
    八步,主動行走滾輪架運載工件向后移動;
    8th , the adjustable rotator move backwards together with the tower body.
    九步,裝夾第四節筒體于組對滾輪架一側;
    9th, put the fourth section on fit up rotator
    十步,通過調節組對滾輪架實現組對焊接;
    10th, spot welding done by adjusting fit up rotator
     
     
    十一步,焊接操作機完成內環縫焊接;
    11th, welding manipulator finish inside circular welding.
    如此重復上述步驟,直到完成結束的一節帶法蘭筒體內環縫焊接。
    Repeat above steps until the last section with flange is fit up.
    十二步:用行走焊接操作機完成整個塔體的外環縫焊接。
    12th , the movable manipulator do all outside circular welding.
     
     

    相關閱讀

    Copyright © 2019 無錫市匯安威力焊割機械有限公司 版權所有??蘇ICP備19019895號??技術支持:冉冉科技